Bluetooth Headphones Smart Watch with Heart Rate Monitor

1 The basic functions

Ai smart iPhone Siri

TWS stereo headphones, single or two simultaneous uses

Heart rate test, blood pressure test

Step count, mileage, consumption

Sleep monitoring, sedentary reminder, lifting wrist display

WeChat, SMS push, shake an image

2 Software download

A: iPhone A Apple App Store store to search for “AMKang” software and download.

B: Android downloads the AMKang software for QR code recognition.

4. BLE connection and pairing device

1) BLE connection: Search for the device model and connect it in the Settings> Application device interface.

After the connection is successful, the AMKang device model will be displayed under my application device, and you can see the upper left corner of the time interface on the device. Bluetooth successfully connected the symbol. If you don’t see the symbol that indicates the connection is unsuccessful, it works again. Time synchronizes automatically when the connection is successful.

2) After the first connection is successful, the device will automatically connect once the device is turned off and the signal range is off and then returns to the host.

3) The application connects to the second or third device …. Device, unleash the application first and then connect the device.

Note: The device connection cannot be connected under the Bluetooth function of the mobile phone. You must connect to the device before you can use it in the application.

3. Connection and combination consideration

1) make sure the mobile phone’s Bluetooth is turned on;

2) make sure the equipment is fully charged, turned on or charged before using it;

3) make sure the device is within 50 cm of the phone When pairing the connection;

4) If the Android phone cannot find the device in the mobile application, check if Bluetooth can be used in the phone’s permission settings.

5) When pairing the headphones, make sure the headphones are removed from the bracelet host; If Bluetooth is not found, put the headphones on the bracelet and take them out.

Instructions and precautions of the Bluetooth headset function

A pairing headset

1 headset pairing: take the headset from the wristband host, there is a quick power tone, turn on the Bluetooth in the phone settings, find the corresponding Bluetooth name (SH30L) and pair it with the connection. (The headphones are already connected and the pairing is good before leaving the factory. After that, only the name of the main Bluetooth is displayed, with “L”). After the pairing is successful, the configuration shows “connected”, indicates that the product connection is successful.

2 After the headset is paired correctly, return it to the bracelet host, and then remove the headphones from the bracelet host to turn on and connect automatically.

3 After the headphones pair properly, if the phone is disconnected manually, you need to reconnect in the Bluetooth Settings of the phone.

4, Pairing headphones: first turn off the two headphones, then press the 16 S button, release your hand and then press the button at the same time. It will automatically complete the pairing. The Bluetooth function in the phone settings must be turned off for connection.

B The middle touch button on the headset is a dedicated button for the Bluetooth headset, which is used to answer incoming calls, reject incoming calls, mutate calls, return calls, and activate voice assistants in the headset status.

C. Answer / hang up / reject calls

When the headset is at the base of the bracelet, there is an incoming call, and it is taken out of the base to connect it automatically. The handset is long outside the base of the bracelet, and the incoming call must be answered manually.

Double click on the button to answer the call;

Double click to hang up the phone;

Long press to reject the call;

During the call, put the headset back on the base headset to turn off the phone, and the other party does not turn off the phone, then automatically switch to the mobile phone to answer.

D. Silence the call

While the headset is on a call, press and hold the 3 S touch button to enter the silence, then press and hold to return to the call.

When the headset has an incoming call at the base of the bracelet, the device will vibrate and display a reminder. Touch the touch button to remotely operate manual silence. Press and hold the touch button for 3 seconds to reject it directly.

E, call back

Double click on the button to return the number of the last call.

F. Voice and call assistant

When the headset is connected, 3 Touch the touch button to activate the iPhone siri, the voice assistant of the android phone, and the voice assistant can be used to take out the phone and check the time. The success rate of the command execution after activating the voice assistant is related to the intelligence level of the mobile phone voice assistant itself.

When activating the voice assistant, you must ensure that the headphones are far from the base of the bracelet and are in active connection with the Bluetooth of the mobile phone. The activation operation is only valid on the standby interface or on the main time interface.

Precautions

1 it is forbidden to use the adapter with charging voltage> 5 v and charging current> 2A, the charging time is 60 minutes;

2. It is forbidden to load in case of water stains;

3. It is forbidden to soak, swim, dive, dive, hot shower;

4. This product does not support impermeability. Remove it when washing your hands, rain, extendable exercise, etc. which can cause the equipment to enter the water.

5 This product is an electronic monitoring product, not for medical reference, the data is for reference only;

6 blood pressure test method: keep your body relaxed and still when you try it, and make sure the bracelet is at the same height as the heart. Don’t talk when you try it;

7. Wearing the ear during intense exercise may cause the product to be damaged or lost during exercise.